Pasito 1.0

Step lights for outdoor applications

step light for outdoor applications - 13W 230Vac / 8,5W 24Vdc

Technical data

Updated to PA10100FAH

Required outer casing not included
  • CE mark for the European Union
  • UKCA mark for Great Britain
  • CB
  • EAC
  • BIS R-41105201
  • lighting fixture with LED technology
  • appliance class II
    230Vac
  • gross weight
    kg 0,49
  • IP65
  • IK07
  • IPS
  • RAL finish on request
  • Casambi control
  • F
Installation step light for outdoor applications
Power consumption 13W
Power supply 230Vac
Lumen output at source 851 lm (3000K, CRI 80)
Delivered lumen output 390 lm (3000K, 150°x90° asymmetrical, CRI 80, white finish)
Datasheet
Pasito 1.0 code: PA10100FAH step light for outdoor applications
recessed, flush (wall)
Power consumption: 13W
Power supply: 230Vac
Lumen output at source: 851 lm (3000K, CRI 80)
Delivered lumen output: 390 lm (3000K, 150°x90° asymmetrical, CRI 80, white finish)
1 high-intensity power LED, 3-step MacAdam, 50 000h L90 B10 (Ta 25°C)
LED colour: 2700K
Optics: asymmetrical 150°x90°: optical system consisting of an asymmetrical hemispherical lens, installed at an angle and set back in the chamber to to create a controlled downward light beam, reducing light spill to a minimum
Upward flux fraction: 14,72% (asymmetrical 150°x90°, white, grey finish), 1,49% (asymmetrical 150°x90°, cor-ten, anthracite finish), 13,44% (60°, white, grey finish) , 1,76% (60°, cor-ten, anthracite finish)
CRI Colour Rendering Index: 80
Body material: body made of ANTICORODAL 6060 low-copper-content aluminium alloy, made from an extruded profile, then anodized black to give the product better heat dissipation and increase its resistance to corrosion. Structured reflector made of extruded ANTICORODAL 6060 aluminium, painted in the same colour
Finishes: anthracite finish obtained through an initial treatment with a ceramic nanoparticle coating, to prepare for painting, followed by a coat of epoxy paint and one of polyester paint to provide corrosion resistance of more than 1500 hours of salt spray. Paints compliant with the Qualicoat standard used in the automotive sector
RAL finish on request
power supply unit included
includes 0.20 m neoprene cable, H05RN-F 2x1.00 Ø7 mm
Ingress protection: IP65
Impact resistance: IK07
Casambi control using the Casambi app with dedicated electronics
Protection systems: IPS (Intelligent Protection System) protects lighting fixtures from water infiltrations, which can occur if there are faulty junctions between the cables in outdoor or underwater applications. This innovation, patented by L&L, also guarantees electrical protection against polarity reversal, hot plugging, ESD and power surges, which can occur if there are faults in the electrical circuit
Operating temperature: -20°C — +45°C
Photobiological safety: photobiological safety: risk group 1 according to EN 62471:2006
Appliance class: class II
Weight: 490 g
Dimensions: 143x67x161 mm
Cutout dimensions: 143x161 mm
Energy efficiency class: F (light source) in accordance with EU 2019/2015
Accessories: WC1410H Outer casing - anthracite
tested and approved via E.O.L. (End Of Line) test with functioning test and check of electrical power consumption
Mounting recessed, flush (wall)
Number and type of LED 1 high-intensity power LED, 3-step MacAdam, 50 000h L90 B10 (Ta 25°C)
LED colour 2700K
Optics asymmetrical 150°x90°
CRI Colour Rendering Index 80
Body material body in anticorodal aluminium
Finishes anthracite
Power supply unit power supply unit included
Power cables includes 0.20 m neoprene cable, H05RN-F 2x1.00 Ø7 mm
Ingress protection IP65
Impact resistance IK07
Status Available