Moby 1.1
Recessed for underwater applications
recessed for underwater applications - 10W - 24Vdc - Ø180 mm - glass cover
![](/media/prodotti/foto/moby_1.1_still.jpg)
Recessed for underwater applications
recessed for underwater applications - 10W - 24Vdc - Ø180 mm - glass cover
Updated to MY1100YSV
Installation | recessed for underwater applications (suitable for use in seawater, only suitable for underwater applications) |
---|---|
Power consumption | 10W |
Power supply | 24Vdc |
Lumen output at source | cyan: 598 lm, G: 451 lm B: 147 lm |
Delivered lumen output | cyan: 424 lm, G: 320 lm B: 104 lm |
Datasheet | Moby 1.1 code: MY1100YSV
recessed for underwater applications (suitable for use in seawater, only suitable for underwater applications) recessed (wall), max depth 10 m Power consumption: 10W Power supply: 24Vdc Lumen output at source: cyan: 598 lm, G: 451 lm B: 147 lm Delivered lumen output: cyan: 424 lm, G: 320 lm B: 104 lm 1 cyan power LED group, 50 000h L90 B10 (Ta 25°C) LED colour: shades of cyan Optics: 21°: optical system consisting of a high-efficiency, deep-set TIR lens combined with a high-quality technical filter Body material: body made of heat-dissipating technopolymer with a thermal conductivity equal to that of stainless steel Screen material: glass cover in 12-mm-thick, tempered extra-clear glass with vitrified serigraphy suitable for installations in seawater and guaranteeing resistance to corrosion and to knocks and scratches. Mixing chamber to ensure the light's chromatic uniformity. power supply unit not included includes 5 m FEP+RUB cable (equivalent to H05RN-F cable), 6x0,50 Ø6.3 mm Ingress protection: IP65, IP68 Impact resistance: IK10 not suitable for use in swimming pools with liners; Casambi control using the Casambi app with dedicated electronics Protection systems: IPS (Intelligent Protection System) protects lighting fixtures from water infiltrations, which can occur if there are faulty junctions between the cables in outdoor or underwater applications. This innovation, patented by L&L, also guarantees electrical protection against polarity reversal, hot plugging, ESD and power surges, which can occur if there are faults in the electrical circuit; This is an NTC thermistor mounted on the LED board to protect the lighting fixture against overheating. Should the product function at an operating temperature greater than the maximum temperature at which it can operate correctly, the protection is activated and gradually reduces the power. The NTC causes the integrated electronic parts to cool down to avoid the lighting fixture instantly switching itself off. When the operating temperature is again within normal range, the NTC automatically restores the lighting fixture’s original operating conditions Operating temperature: 0°C — +45°C (installation underwater) Glow wire test: 960° Photobiological safety: photobiological safety: risk group 1 according to EN 62471:2006 Appliance class: class III Weight: 1420 g Dimensions: Ø180x134 mm Cutout dimensions: Ø200 mm Energy efficiency class: F (light source) in accordance with EU 2019/2015 Accessories: WC5201 Outer casing, WH0401 Honeycomb louvre tested and approved via E.O.L. (End Of Line) test with functioning test and check of electrical power consumption |
Mounting | recessed (wall), max depth 10 m |
Number and type of LED | 1 cyan power LED group, 50 000h L90 B10 (Ta 25°C) |
LED colour | shades of cyan |
Optics | 21° |
Body material | body in thermally conductive technopolymer |
Screen material | glass cover with vitrified serigraphy |
Power supply unit | power supply unit not included |
Power cables | includes 5 m FEP+RUB cable (equivalent to H05RN-F cable), 6x0,50 Ø6.3 mm |
Ingress protection | IP65, IP68 |
Impact resistance | IK10 |
Status | Available |