Plin 3.2

Bollards for outdoor applications

bollard for outdoor applications - 24W 230Vac - double beam - diffuse, asymmetrical optics - h 760 mm

Technical data

  • CE mark for the European Union
  • UKCA mark for Great Britain
  • CB
  • EAC
  • lighting fixture with LED technology
  • gross weight
    kg 2,35
  • IP65
  • IK08
  • RAL finish on request
  • F
Installation bollard for outdoor applications, double beam
Power consumption 24W
Power supply 230Vac
Lumen output at source 2484 lm (3000K)
Delivered lumen output 984 lm (3000K)
Datasheet
Plin 3.2 bollard for outdoor applications, double beam
surface mounted (floor)
Power consumption: 24W
Power supply: 230Vac
Lumen output at source: 2484 lm (3000K)
Delivered lumen output: 984 lm (3000K)
36 mid-power LEDs, 3-step MacAdam, 50 000h L85 B10 (Ta 25°C)
LED colour: 2700K, 3000K, 4000K
Optics: diffuse, asymmetrical: optical system consisting of serigraphed, tempered, transparent extra-clear glass, combined with a technical filter in PMMA, housed inside the tilted head and illuminating the front and rear areas
Upward flux fraction: 0,40%
CRI Colour Rendering Index: 80
Body material: head made of ANTICORODAL 6082 aluminium alloy, produced entirely on a CNC lathe. Body in aluminium alloy 6060, produced with die-casting
Finishes: grey finish obtained through an initial treatment with a ceramic nanoparticle coating, to prepare for painting, followed by a coat of epoxy paint and one of polyester paint to provide corrosion resistance of more than 1500 hours of salt spray. Paints compliant with the Qualicoat standard used in the automotive sector (RAL 9006), anthracite finish obtained through an initial treatment with a ceramic nanoparticle coating, to prepare for painting, followed by a coat of epoxy paint and one of polyester paint to provide corrosion resistance of more than 1500 hours of salt spray. Paints compliant with the Qualicoat standard used in the automotive sector, cor-ten finish obtained through an initial treatment with a ceramic nanoparticle coating, to prepare for painting, followed by a coat of epoxy paint and one of polyester paint to provide corrosion resistance of more than 1500 hours of salt spray. Paints compliant with the Qualicoat standard used in the automotive sector, white finish obtained through an initial treatment with a ceramic nanoparticle coating, to prepare for painting, followed by a coat of epoxy paint and one of polyester paint to provide corrosion resistance of more than 1500 hours of salt spray. Paints compliant with the Qualicoat standard used in the automotive sector (RAL 9003)
RAL finish on request
Screen material: screen in serigraphed, tempered, transparent extra-clear glass
built-in power supply unit
Ingress protection: IP65
Impact resistance: IK08
non-standard heights available on request, Casambi-compatible version, controllable with the Casambi app, available on request
Operating temperature: -20°C — +45°C
Glow wire test: 960°
Photobiological safety: photobiological safety: risk group 1 according to EN 62471:2006
Appliance class: class I
Weight: 2350 g
Dimensions: 124x103x760 mm
Energy efficiency class: F (light source) in accordance with EU 2019/2015
tested and approved via E.O.L. (End Of Line) test with functioning test and check of electrical power consumption
Mounting surface mounted (floor)
Number and type of LED 36 mid-power LEDs, 3-step MacAdam, 50 000h L85 B10 (Ta 25°C)
LED colour 2700K, 3000K, 4000K
Optics diffuse, asymmetrical
CRI Colour Rendering Index 80
Body material head and column in aluminium
Screen material screen in serigraphed, transparent, tempered extra-clear glass
Finishes grey, anthracite, cor-ten, white
Power supply unit built-in power supply unit
Ingress protection IP65
Impact resistance IK08
Notes non-standard heights available on request,
Casambi-compatible version, controllable with the Casambi app, available on request
Status Available