Stra 4.0 code: CS40100FLI recessed for outdoor applications (not suitable for use in immersion in swimming pools or fountains)
drive-over up to 5000 kg
recessed (floor)
Power consumption: 25W
Power supply: 230Vac
Lumen output at source: 2411 lm (3000K, CRI 80)
Delivered lumen output: 1395 lm (3000K, 30°, CRI 80)
4 high-intensity power LEDs, 3-step MacAdam, 50 000h L85 B10 (Ta 25°C)
LED colour: 2700K
Optics: 37°: optical system consisting of a high-efficiency, deep-set TIR lens combined with a high-quality technical filter
CRI Colour Rendering Index: 80
Body material: body made of die-cast aluminium. Trim in AISI 316L stainless steel, made with a CNC lathe then micro-peened, passivated and electropolished to guarantee excellent corrosion resistance
Finishes: die-cast body painted with an initial treatment of a ceramic nanoparticle coating, to prepare for painting, followed by a coat of epoxy paint and one of polyester paint to provide corrosion resistance of more than 1500 hours of salt spray. Paints compliant with the Qualicoat standard (automotive standard)
Screen material: 15-mm-thick tempered, transparent extra-clear glass, with vitrified serigraphy, to ensure chromatic uniformity of light and excellent resistance to knocks and scratches
built-in power supply unit
includes 1.5 m neoprene cable H07RN-F 3x1.0 Ø9.3 mm
Ingress protection: IP67 with purpose-built outer casing, IP68 with purpose-built outer casing, IP69
Impact resistance: IK10
motorized adjustable optics: ±10° in every direction, Casambi-compatible version, controllable with the Casambi app, available on request
Protection systems: IPS (Intelligent Protection System) protects lighting fixtures from water infiltrations, which can occur if there are faulty junctions between the cables in outdoor or underwater applications. This innovation, patented by L&L, also guarantees electrical protection against polarity reversal, hot plugging, ESD and power surges, which can occur if there are faults in the electrical circuit; The PID (Protective Impedance Device) protects lighting fixtures from electrical phenomena external to the system, such as static electricity accumulation or electromagnetic interference coming from the mains power. Generally, these are events with a low energy content; The SPD (Surge Protection Device) protects lighting fixtures from electrical phenomena external to the system, such as power surges. In particular, this device is specifically for protection against serious events with a high energy content
Operating temperature: -20°C — +45°C
Maximum device temperature: 50°C (Ta 25°C)
Glow wire test: 960°
Photobiological safety: photobiological safety: risk group 1 according to EN 62471:2006
Appliance class: class I
Weight: 5000 g
Dimensions: Ø290x138 mm
Volume of thermal heatsink: Ø660x265 mm
Energy efficiency class: F (light source) in accordance with EU 2019/2015
Accessories: TLC07 Infrared remote control, WC5610 Outer casing, WC5611 Outer casing, WE0202 Tamper-resistant screw kit, WE0203 Screwdriver for tamper-resistant screws, WH0610 Honeycomb louvre, WN7001 Pair of extractors for outer casings
tested and approved via E.O.L. (End Of Line) test with functioning test and check of electrical power consumption