Stra 1.0

Recessed for outdoor applications

recessed for outdoor applications - 37W 230Vac - fixed optics and 66°x11° optics adjustable through 360° using the magnet provided (patented)- ø290 mm - CRI 80 and CRI >90

Technical data

  • CE mark for the European Union
  • UKCA mark for Great Britain
  • EAC
  • BIS R-41105201
  • lighting fixture with LED technology
  • drive-over fixture
    kg 5000 - kN 50
  • gross weight
    kg 5,00
  • IP67
  • IP68
  • IP69
  • IK10
  • IPS
  • PID
  • SPD
  • 0/1-10V
  • maximum device temperature50°C
  • F
Installation recessed for outdoor applications (not suitable for use in immersion in swimming pools or fountains)
Power consumption 37W
Power supply 230Vac
Lumen output at source 3152 lm (3000K, CRI >90),
3402 lm (3000K, CRI 80)
Delivered lumen output 1136 lm (3000K, wall washer, CRI >90),
1420 lm (3000K, wall washer, CRI 80),
1619 lm (3000K, 30°, CRI >90),
1764 lm (3000K, 66°x11° adjustable, CRI >90),
2024 lm (3000K, 30°, CRI 80),
2205 lm (3000K, 66°x11° adjustable, CRI 80)
Datasheet
Stra 1.0 recessed for outdoor applications (not suitable for use in immersion in swimming pools or fountains)
drive-over up to 5000 kg
recessed (floor)
Power consumption: 37W
Power supply: 230Vac
Lumen output at source: 3152 lm (3000K, CRI >90), 3402 lm (3000K, CRI 80)
Delivered lumen output: 1136 lm (3000K, wall washer, CRI >90), 1420 lm (3000K, wall washer, CRI 80), 1619 lm (3000K, 30°, CRI >90), 1764 lm (3000K, 66°x11° adjustable, CRI >90), 2024 lm (3000K, 30°, CRI 80), 2205 lm (3000K, 66°x11° adjustable, CRI 80)
4 high-intensity power LEDs, 3-step MacAdam, 50 000h L90 B10 (Ta 25°C)
LED colour: 2700K, 3000K, 4000K
Optics: 11°, 14°, 30°, 37°, 10°x45°: optical system consisting of a high-efficiency, deep-set TIR lens combined with a high-quality technical filter, adjustable 66°x11°: optical system consisting of a high-efficiency TIR lens combined with a high-quality elliptical technical filter and integrated with magnetic material for adjusting the ellipsis (patented), wall washer: optical system consisting of a high-efficiency, deep-set TIR lens combined with a high-quality asymmetrical, elliptical technical filter
CRI Colour Rendering Index: 80, >90
Body material: body made of die-cast aluminium. Trim in AISI 316L stainless steel, made with a CNC lathe then micro-peened, passivated and electropolished to guarantee excellent corrosion resistance
Finishes: die-cast body painted with an initial treatment of a ceramic nanoparticle coating, to prepare for painting, followed by a coat of epoxy paint and one of polyester paint to provide corrosion resistance of more than 1500 hours of salt spray. Paints compliant with the Qualicoat standard (automotive standard)
Screen material: 15-mm-thick tempered, transparent extra-clear glass, with vitrified serigraphy, to ensure chromatic uniformity of light and excellent resistance to knocks and scratches
built-in power supply unit
includes 1,5 m neoprene cable, H07RN-F 3x1,0 Ø9,3 mm
Control system: ON/OFF, 0/1-10V
Ingress protection: IP67 with purpose-built outer casing, IP68 with purpose-built outer casing, IP69
Impact resistance: IK10
66°x11° optics, adjustable through 360° using the magnet provided; DALI version available on request, Casambi-compatible version, controllable with the Casambi app, available on request
Protection systems: IPS (Intelligent Protection System) protects lighting fixtures from water infiltrations, which can occur if there are faulty junctions between the cables in outdoor or underwater applications. This innovation, patented by L&L, also guarantees electrical protection against polarity reversal, hot plugging, ESD and power surges, which can occur if there are faults in the electrical circuit; The PID (Protective Impedance Device) protects lighting fixtures from electrical phenomena external to the system, such as static electricity accumulation or electromagnetic interference coming from the mains power. Generally, these are events with a low energy content; The SPD (Surge Protection Device) protects lighting fixtures from electrical phenomena external to the system, such as power surges. In particular, this device is specifically for protection against serious events with a high energy content
Operating temperature: -20°C — +45°C
Maximum device temperature: 50°C (Ta 25°C)
Glow wire test: 960°
Photobiological safety: photobiological safety: risk group 1 according to EN 62471:2006
Appliance class: class I
Weight: 5000 g
Dimensions: Ø290x138 mm
Volume of thermal heatsink: Ø660x265 mm
Energy efficiency class: F (light source) in accordance with EU 2019/2015
Accessories: WC5610 Outer casing, WC5611 Outer casing, WE0201 Magnet for adjustable optics and zoom lens, WE0202 Tamper-resistant screw kit, WE0203 Screwdriver for tamper-resistant screws, WH0610 Honeycomb louvre, WN7001 Pair of extractors for outer casings
tested and approved via E.O.L. (End Of Line) test with functioning test and check of electrical power consumption
Mounting recessed (floor)
Number and type of LED 4 high-intensity power LEDs, 3-step MacAdam, 50 000h L90 B10 (Ta 25°C)
LED colour 2700K, 3000K, 4000K
Optics 11°, 14°, 30°, 37°, 10°x45°, adjustable 66°x11°, wall washer
CRI Colour Rendering Index 80, >90
Body material body in die-cast aluminium, trim in AISI 316L stainless steel
Screen material screen in serigraphed, transparent, tempered extra-clear glass
Finishes stainless steel
Power supply unit built-in power supply unit
Power cables includes 1,5 m neoprene cable, H07RN-F 3x1,0 Ø9,3 mm
Control system ON/OFF, 0/1-10V
Ingress protection IP67 with purpose-built outer casing, IP68 with purpose-built outer casing, IP69
Impact resistance IK10
Notes 66°x11° optics, adjustable through 360° using the magnet provided;
DALI version available on request,
Casambi-compatible version, controllable with the Casambi app, available on request
Status Available