Rondò 3.1 step light for outdoor applications, single beam
drive-over up to 5000 kg
recessed (floor)
Power consumption: 3W
Power supply: 24Vdc; 230Vac
Lumen output at source: 185 lm (3000K)
Delivered lumen output: 90 lm (3000K, radial optics)
1 power LED, 1/4 ANSI BIN, 50 000h L95 B10 (Ta 25°C)
LED colour: 2700K, 3000K, 4000K
Optics: 10°: optical system consisting of a high-efficiency lens that produces a narrow light beam, radial: optical system consisting of a high-efficiency TIR lens
Upward flux fraction: 38,18% (radial optics), 21,13% (10°)
CRI Colour Rendering Index: 80
Body material: body made of micro-cast AISI 316L stainless steel, produced entirely on a CNC lathe
Finishes: stainless steel finish obtained through micro-shot peening, an electrolytic passivation treatment and electropolishing, anthracite finish obtained through micro-shot peening, an electrolytic passivation treatment and electropolishing; then painted through an initial treatment with a ceramic nanoparticle coating, to prepare for painting, followed by a coat of epoxy paint and one of polyester paint, to provide corrosion resistance of more than 1000 hours of salt spray testing. Paints compliant with the Qualicoat standard used in the automotive sector, cor-ten finish obtained through micro-shot peening, an electrolytic passivation treatment and electropolishing; then painted through an initial treatment with a ceramic nanoparticle coating, to prepare for painting, followed by a coat of epoxy paint and one of polyester paint to provide corrosion resistance equal to more than 1000 hours of salt spray testing. Paints compliant with the Qualicoat standard used in the automotive sector
RAL finish on request
Screen material: Rilsan® Clear protective screen in clear PA12 polyamide with high mechanical and optical performance
Seals: O-ring in 4-mm expanded silicone
230Vac: built-in power supply unit, 24Vdc: power supply unit not included
230Vac version: includes 1,5 m neoprene cable H07RN-F 3x1,0 Ø8,7 mm, 24Vdc version: includes 1,5 m neoprene cable H05RN-F 2x0,35/0,75 Ø6,3 mm
Ingress protection: IP67
Impact resistance: IK08
Protection systems: IPS (Intelligent Protection System) protects lighting fixtures from water infiltrations, which can occur if there are faulty junctions between the cables in outdoor or underwater applications. This innovation, patented by L&L, also guarantees electrical protection against polarity reversal, hot plugging, ESD and power surges, which can occur if there are faults in the electrical circuit; The PID (Protective Impedance Device) protects lighting fixtures from electrical phenomena external to the system, such as static electricity accumulation or electromagnetic interference coming from the mains power. Generally, these are events with a low energy content
Operating temperature: -20°C — +45°C
Maximum device temperature: 45°C (Ta 25°C)
Photobiological safety: photobiological safety: risk group 1 according to EN 62471:2006
Appliance class: class I (230Vac), class III (24Vdc)
Weight: 1980 g
Dimensions: Ø160x87 mm
Energy efficiency class: F (light source) in accordance with EU 2019/2015
Accessories: WC0601 Outer casing, WC0701 Outer casing, WE0100 Tool for tamper-resistant screws
tested and approved via E.O.L. (End Of Line) test with functioning test and check of electrical power consumption