Siri 3.0 projector for outdoor applications
surface mounted (ceiling, wall, ground, spike)
Power consumption: 23W
Power supply: 230Vac
Lumen output at source: 2214 lm (3000K)
Delivered lumen output: 1491 lm (3000K, 30°)
9 power LEDs, 1/4 ANSI BIN, 50 000h L95 B10 (Ta 25°C)
LED colour: 2700K, 3000K, 4000K
Optics: 6°: optical system consisting of a high-efficiency TIR lens, 12°, 30°, 40°, 10°x45°: optical system composed of a series of light sources. The deep-set TIR lens guarantees high-quality light emission and visual comfort
CRI Colour Rendering Index: 80
Body material: body made of low-copper-content die-cast aluminium alloy EN AB 47100 for excellent resistance to corrosion
Finishes: white finish obtained through an initial treatment with a ceramic nanoparticle coating, to prepare for painting, followed by a coat of epoxy paint and one of polyester paint to provide corrosion resistance of more than 1000 hours of salt spray. Paints compliant with the Qualicoat standard used in the automotive sector (RAL 9003), grey finish obtained through an initial treatment with a ceramic nanoparticle coating, to prepare for painting, followed by a coat of epoxy paint and one of polyester paint to provide corrosion resistance of more than 1000 hours of salt spray. Paints compliant with the Qualicoat standard used in the automotive sector (RAL 9006), anthracite finish obtained through an initial treatment with a ceramic nanoparticle coating, to prepare for painting, followed by a coat of epoxy paint and one of polyester paint to provide corrosion resistance of more than 1000 hours of salt spray. Paints compliant with the Qualicoat standard used in the automotive sector, cor-ten finish obtained through an initial treatment with a ceramic nanoparticle coating, to prepare for painting, followed by a coat of epoxy paint and one of polyester paint to provide corrosion resistance of more than 1000 hours of salt spray. Paints compliant with the Qualicoat standard used in the automotive sector
RAL finish on request
Screen material: 4-mm-thick transparent extra-clear glass with vitrified serigraphy, high transmittance to ensure chromatic uniformity of light and tempered for excellent resistance to knocks and scratches
built-in power supply unit
includes 1,5 m neoprene cable, H05RN-F 3x1,0 Ø7 mm
Control system: 0/1-10V, ON/OFF
Ingress protection: IP66
Impact resistance: IK06
Casambi-compatible version, controllable with the Casambi app, available on request
Protection systems: IPS (Intelligent Protection System) protects lighting fixtures from water infiltrations, which can occur if there are faulty junctions between the cables in outdoor or underwater applications. This innovation, patented by L&L, also guarantees electrical protection against polarity reversal, hot plugging, ESD and power surges, which can occur if there are faults in the electrical circuit; The PID (Protective Impedance Device) protects lighting fixtures from electrical phenomena external to the system, such as static electricity accumulation or electromagnetic interference coming from the mains power. Generally, these are events with a low energy content; This is an NTC thermistor mounted on the LED board to protect the lighting fixture against overheating. Should the product function at an operating temperature greater than the maximum temperature at which it can operate correctly, the protection is activated and gradually reduces the power. The NTC causes the integrated electronic parts to cool down to avoid the lighting fixture instantly switching itself off. When the operating temperature is again within normal range, the NTC automatically restores the lighting fixture’s original operating conditions
Operating temperature: -20°C — +45°C
Glow wire test: 960°
Photobiological safety: photobiological safety: risk group 1 according to EN 62471:2006
Appliance class: class I
Weight: 2240 g
Dimensions: 283x189x48 mm
Energy efficiency class: F (light source) in accordance with EU 2019/2015
Accessories: WB5030H Anti-glare hood - anthracite, WH5030 Honeycomb louvre , WP0300 Spike for in-ground installation
tested and approved via E.O.L. (End Of Line) test with functioning test and check of electrical power consumption