Pivot 2.9 code: CP2900000050WH bollard for outdoor applications
surface mounted (spike)
Power consumption: 10W
Power supply: 24Vdc
Lumen output at source: 978 lm (3000K, 10W, CRI 80)
Delivered lumen output: 835 lm (3000K, 25°, 10W, CRI 80)
1 COB LED, 3-step MacAdam, 50 000h L95 B10 (Ta 25°C)
LED colour: 3000K
Optics: adjustable 13°x68°
CRI Colour Rendering Index: 80
Body material: body made of ANTICORODAL EN AW 6082 low-copper-content aluminium alloy for excellent resistance to corrosion, made entirely on a CNC lathe
Finishes: anthracite finish obtained through an initial treatment with a ceramic nanoparticle coating, to prepare for painting, followed by a coat of epoxy paint and one of polyester paint to provide corrosion resistance of more than 1000 hours of salt spray
RAL finish on request
Screen material: 3-mm-thick transparent extra-clear glass with vitrified serigraphy, high transmittance to ensure chromatic uniformity of light and tempered for excellent resistance to knocks and scratches
Seals: The NBR nitrile rubber O-rings ensure the fixture’s IP rating is preserved, guaranteeing continued protection
Installation: Two installation options: spike with single lighting fixture, or spike with additional arm for a second lighting fixture. The pivot at the base of the lighting fixture enables great flexibility in aiming the light output.
power supply unit not included
includes 1.50 m neoprene cable, H05RN-F 2x0,35/0,75 Ø6,3 mm
Ingress protection: IP66
Impact resistance: IK08
Casambi control using the Casambi app with dedicated electronics
Protection systems: IPS (Intelligent Protection System) protects lighting fixtures from water infiltrations, which can occur if there are faulty junctions between the cables in outdoor or underwater applications. This innovation, patented by L&L, also guarantees electrical protection against polarity reversal, hot plugging, ESD and power surges, which can occur if there are faults in the electrical circuit
Operating temperature: -20°C — +45°C
Glow wire test: 960°C
Photobiological safety: photobiological safety: risk group 1 according to EN 62471:2006
Appliance class: class III
Weight: 560 g
Dimensions: Ø60x96 mm
Energy efficiency class: F (light source) in accordance with EU 2019/2015
Accessories: WB1001H Standard snoot - anthracite, WB1002H Asymmetrical snoot - anthracite, WPA00H Spike for in-ground installation - h 500 mm - anthracite, WPA01H Spike for in-ground installation - h 800 mm - anthracite, WPA02H Spike for in-ground installation - h 1100 mm - anthracite, WPA03H Dual-fixture spike for in-ground installation - h 500 mm - anthracite, WPA04H Dual-fixture spike for in-ground installation - h 800 mm - anthracite, WPA11H Dual-fixture spike for in-ground installation - h 1100 mm - anthracite
tested and approved via E.O.L. (End Of Line) test with functioning test and check of electrical power consumption