Pivot Mini 1 code: CP0101000050LH projector for outdoor applications
surface mounted (ceiling, wall, floor)
Power consumption: 3,5W
Power supply: 24Vdc
Lumen output at source: 260 lm (3000K, 3.5W, CRI 80)
Delivered lumen output: 158 lm (3000K, 15°, 3.5W, CRI 80)
1 power LED, 2-step MacAdam, 60 000h L90 B10 (Ta 25°C)
LED colour: 3000K
Optics: 35°: optical system consisting of a high-efficiency TIR lens
CRI Colour Rendering Index: 80
Body material: body made of ANTICORODAL EN AW 6082 low-copper-content aluminium alloy for excellent resistance to corrosion, made entirely on a CNC lathe
Finishes: anthracite finish obtained through an initial treatment with a ceramic nanoparticle coating, to prepare for painting, followed by a coat of epoxy paint and one of polyester paint to provide corrosion resistance of more than 1000 hours of salt spray
RAL finish on request
Screen material: 3-mm-thick transparent extra-clear glass with vitrified serigraphy, high transmittance to ensure chromatic uniformity of light and tempered for excellent resistance to knocks and scratches
Seals: The NBR nitrile rubber O-rings ensure the fixture’s IP rating is preserved, guaranteeing continued protection
power supply unit not included
includes 1.50 m neoprene cable, H05RN-F 2x0,35/0,75 Ø6,3 mm
Ingress protection: IP66
Impact resistance: IK06
Casambi control using the Casambi app with dedicated electronics
Protection systems: IPS (Intelligent Protection System) protects lighting fixtures from water infiltrations, which can occur if there are faulty junctions between the cables in outdoor or underwater applications. This innovation, patented by L&L, also guarantees electrical protection against polarity reversal, hot plugging, ESD and power surges, which can occur if there are faults in the electrical circuit; The PID (Protective Impedance Device) protects lighting fixtures from electrical phenomena external to the system, such as static electricity accumulation or electromagnetic interference coming from the mains power. Generally, these are events with a low energy content
Operating temperature: -20°C — +45°C
Glow wire test: 960°
Photobiological safety: photobiological safety: risk group 1 according to EN 62471:2006
Appliance class: class III
Weight: 135 g
Dimensions: Ø25x49 mm
Energy efficiency class: F (light source) in accordance with EU 2019/2015
Accessories: WBA02H Standard snoot - anthracite, WBA03H Asymmetrical snoot - anthracite
tested and approved via E.O.L. (End Of Line) test with functioning test and check of electrical power consumption