Bright 5.H

Recessed for outdoor applications

recessed for outdoor applications - 20W 24Vdc - ø148 mm - RGBW

Technical data

Updated to CB5H00000070SI

  • RGBW
  • CE mark for the European Union
  • UKCA mark for Great Britain
  • CB
  • EAC
  • lighting fixture with LED technology
  • appliance class III
  • drive-over fixture
    kg 4000 - kN 40
  • gross weight
    1,35 kg
  • IP65
  • IP68
  • IP69
  • IK10
  • IPS
  • PID
  • NTC
  • Casambi control
  • maximum device temperature55°C
  • F
Installation recessed for outdoor applications (not suitable for use in immersion in swimming pools or fountains)
Power consumption 20W
Power supply 24Vdc
Lumen output at source 1021 lm, R: 146 lm G: 329 lm B: 117 lm W: 429 lm (4000K)
Delivered lumen output 656 lm, R: 101 lm G: 204 lm B: 75 lm W: 276 lm (4000K, 20°)
Datasheet
Bright 5.H code: CB5H00000070SI recessed for outdoor applications (not suitable for use in immersion in swimming pools or fountains)
drive-over up to 4000 kg
recessed (ceiling, wall, floor)
Power consumption: 20W
Power supply: 24Vdc
Lumen output at source: 1021 lm, R: 146 lm G: 329 lm B: 117 lm W: 429 lm (4000K)
Delivered lumen output: 656 lm, R: 101 lm G: 204 lm B: 75 lm W: 276 lm (4000K, 20°)
3 groups of 4 power LEDs, 50 000h L85 B10 (Ta 25°C)
LED colour: RGBW
Optics: 20°: optical system made up of three groups, each consisting of 4 high-efficiency TIR microlenses combined with a high-quality technical filter
Body material: body made of ANTICORODAL 6082 aluminium alloy, made entirely on a CNC lathe and then electro-coloured black. Trim in AISI 316L stainless steel, made with a CNC lathe
Screen material: 10-mm-thick transparent extra-clear glass, high transmittance to ensure chromatic uniformity of light, serigraphed grey and tempered for excellent resistance to knocks and scratches
Seals: the silicone rubber gaskets guarantee maximum resistance to UV rays and unchanging mechanical characteristics over time
power supply unit not included
includes 1.50 m FEP+RUB cable (equivalent to H05RN-F) 6x0.50/0.50 Ø6.3 mm
Ingress protection: IP65, IP68, IP69
Impact resistance: IK10
Casambi control using the Casambi app with dedicated electronics
Protection systems: IPS (Intelligent Protection System) protects lighting fixtures from water infiltrations, which can occur if there are faulty junctions between the cables in outdoor or underwater applications. This innovation, patented by L&L, also guarantees electrical protection against polarity reversal, hot plugging, ESD and power surges, which can occur if there are faults in the electrical circuit; The PID (Protective Impedance Device) protects lighting fixtures from electrical phenomena external to the system, such as static electricity accumulation or electromagnetic interference coming from the mains power. Generally, these are events with a low energy content; This is an NTC thermistor mounted on the LED board to protect the lighting fixture against overheating. Should the product function at an operating temperature greater than the maximum temperature at which it can operate correctly, the protection is activated and gradually reduces the power. The NTC causes the integrated electronic parts to cool down to avoid the lighting fixture instantly switching itself off. When the operating temperature is again within normal range, the NTC automatically restores the lighting fixture’s original operating conditions
Operating temperature: -20°C — +45°C
Maximum device temperature: 55°C (Ta 25°C)
Glow wire test: 960°
Photobiological safety: photobiological safety: risk group 1 according to EN 62471:2006
Appliance class: class III
Weight: 1350 g
Dimensions: Ø148x90 mm
Cutout dimensions: Ø125 mm
Volume of thermal heatsink: Ø260x150 mm
Energy efficiency class: F (light source) in accordance with EU 2019/2015
Accessories: WC0501 Outer casing, WC0601 Outer casing, WC0701 Outer casing, WG0200 Retaining spring clip Ø130mm
tested and approved via E.O.L. (End Of Line) test with functioning test and check of electrical power consumption
Mounting recessed (ceiling, wall, floor)
Number and type of LED 3 groups of 4 power LEDs, 50 000h L85 B10 (Ta 25°C)
LED colour RGBW
Optics 20°
Body material body in black-anodized anticorodal aluminium, trim in AISI 316L stainless steel
Screen material screen in serigraphed-grey and transparent, tempered extra-clear glass
Power supply unit power supply unit not included
Power cables includes 1.50 m FEP+RUB cable (equivalent to H05RN-F) 6x0.50/0.50 Ø6.3 mm
Ingress protection IP65, IP68, IP69
Impact resistance IK10
Status Available