Pasito Mini 1.1 step light for outdoor applications
recessed, with frame (wall)
Power consumption: 6W (230Vac), 5W (24Vdc)
Power supply: 24Vdc, 230Vac
Lumen output at source: 355 lm (3000K, CRI >90), 383 lm (3000K, CRI 80)
Delivered lumen output: 170 lm (3000K, 60°, CRI >90, white finish), 186 lm (3000K, 150°x90° asymmetrical, CRI >90, white finish), 195 lm (3000K, 60°, CRI 80, white finish), 214 lm (3000K, 150°x90° asymmetrical, CRI 80, white finish)
1 high-intensity power LED, 1/4 ANSI BIN, 50 000h L90 B10 (Ta 25°C)
LED colour: 2700K, 3000K, 4000K
Optics: 60°: optical system consisting of a 60° hemispherical lens, installed at an angle and set back in the chamber to to create a controlled downward light beam, reducing light spill to a minimum, asymmetrical 150°x90°: optical system consisting of an asymmetrical hemispherical lens, installed at an angle and set back in the chamber to to create a controlled downward light beam, reducing light spill to a minimum
Upward flux fraction: 15,83% (asymmetrical 150°x90°, white, grey finish), 1,65% (asymmetrical 150°x90°, cor-ten, anthracite finish), 11,25% (60°, white, grey finish), 3,59% (60°, cor-ten, anthracite finish)
CRI Colour Rendering Index: 80, >90
Body material: body made of technopolymer with high resistance to impact and sub-zero temperatures, and heat sink made of aluminium to optimize heat dissipation
Finishes: white finish obtained through an initial treatment with a ceramic nanoparticle coating, to prepare for painting, followed by a coat of epoxy paint and one of polyester paint to provide corrosion resistance of more than 1500 hours of salt spray. Paints compliant with the Qualicoat standard used in the automotive sector (RAL 9003), grey finish obtained through an initial treatment with a ceramic nanoparticle coating, to prepare for painting, followed by a coat of epoxy paint and one of polyester paint to provide corrosion resistance of more than 1500 hours of salt spray. Paints compliant with the Qualicoat standard used in the automotive sector (RAL 9006), cor-ten finish obtained through an initial treatment with a ceramic nanoparticle coating, to prepare for painting, followed by a coat of epoxy paint and one of polyester paint to provide corrosion resistance of more than 1500 hours of salt spray. Paints compliant with the Qualicoat standard used in the automotive sector, anthracite finish obtained through an initial treatment with a ceramic nanoparticle coating, to prepare for painting, followed by a coat of epoxy paint and one of polyester paint to provide corrosion resistance of more than 1500 hours of salt spray. Paints compliant with the Qualicoat standard used in the automotive sector
RAL finish on request
230Vac: power supply unit included, 24Vdc: power supply unit not included
230Vac version: includes 0.20 m neoprene cable, H05RN-F 2x1.00 Ø7 mm; 24Vdc version: includes 0.30 m neoprene cable, H05RN-F 2x0.35/0.75 Ø6.3 mm
Ingress protection: IP65
Impact resistance: IK06
Protection systems: IPS (Intelligent Protection System) protects lighting fixtures from water infiltrations, which can occur if there are faulty junctions between the cables in outdoor or underwater applications. This innovation, patented by L&L, also guarantees electrical protection against polarity reversal, hot plugging, ESD and power surges, which can occur if there are faults in the electrical circuit
Operating temperature: -20°C — +45°C
Photobiological safety: photobiological safety: risk group 1 according to EN 62471:2006
Appliance class: class II (230Vac), class III (24Vdc)
Weight: 300 g
Dimensions: 99x44x143 mm
Cutout dimensions: 85x125 mm
Energy efficiency class: F (light source) in accordance with EU 2019/2015
Accessories: WC1420 Outer casing for solid walls
tested and approved via E.O.L. (End Of Line) test with functioning test and check of electrical power consumption