Flori 1.3 projector for outdoor applications
surface mounted (ceiling, wall, floor)
Power consumption: 13W
Power supply: 24Vdc
Lumen output at source: 512 lm, R: 88 lm G: 160 lm B: 52 lm W: 212 lm (4000K)
Delivered lumen output: 304 lm, R: 52 lm G: 95 lm B: 31 lm W: 126 lm (4000K, 33°)
1 RGBW LED group, 50 000h L85 B10 (Ta 25°C)
LED colour: RGBW
Optics: 24°, 33°, 60°, 32°x61°, 61°x32°: optical system consisting of a high-efficiency TIR lens combined with a high-quality technical filter
Body material: body made of ANTICORODAL 6082 low-copper-content aluminium alloy for excellent resistance to corrosion, made entirely on a CNC lathe. Bracket in painted AISI 316L stainless steel
Finishes: white finish obtained through an initial treatment with a ceramic nanoparticle coating, to prepare for painting, followed by a coat of epoxy paint and one of polyester paint to provide corrosion resistance of more than 1500 hours of salt spray. Paints compliant with the Qualicoat standard used in the automotive sector (RAL 9003), cor-ten finish obtained through an initial treatment with a ceramic nanoparticle coating, to prepare for painting, followed by a coat of epoxy paint and one of polyester paint to provide corrosion resistance of more than 1500 hours of salt spray. Paints compliant with the Qualicoat standard used in the automotive sector, grey finish obtained through an initial treatment with a ceramic nanoparticle coating, to prepare for painting, followed by a coat of epoxy paint and one of polyester paint to provide corrosion resistance of more than 1500 hours of salt spray. Paints compliant with the Qualicoat standard used in the automotive sector (RAL 9006), anthracite finish obtained through an initial treatment with a ceramic nanoparticle coating, to prepare for painting, followed by a coat of epoxy paint and one of polyester paint to provide corrosion resistance of more than 1500 hours of salt spray. Paints compliant with the Qualicoat standard used in the automotive sector
RAL finish on request
Screen material: 4-mm-thick transparent extra-clear glass with vitrified serigraphy, high transmittance to ensure chromatic uniformity of light and tempered for excellent resistance to knocks and scratches
power supply unit not included
includes 1.5 m FEP+RUB cable (equivalent to H05RN-F cable) 6x0.50/0.50 Ø6.3 mm
Ingress protection: IP66
Impact resistance: IK07
Casambi-compatible version, controllable with the Casambi app, available on request, Casambi-compatible version, controllable with the Casambi app, available on request
Protection systems: IPS (Intelligent Protection System) protects lighting fixtures from water infiltrations, which can occur if there are faulty junctions between the cables in outdoor or underwater applications. This innovation, patented by L&L, also guarantees electrical protection against polarity reversal, hot plugging, ESD and power surges, which can occur if there are faults in the electrical circuit; The PID (Protective Impedance Device) protects lighting fixtures from electrical phenomena external to the system, such as static electricity accumulation or electromagnetic interference coming from the mains power. Generally, these are events with a low energy content
Operating temperature: -20°C — +45°C
Glow wire test: 960°
Photobiological safety: photobiological safety: risk group 1 according to EN 62471:2006
Appliance class: class III
Weight: 1100 g
Dimensions: Ø60x154x162 mm
Energy efficiency class: F (light source) in accordance with EU 2019/2015
Accessories: WB1001E Standard snoot - white, WB1001F Standard snoot - grey, WB1001H Standard snoot - anthracite, WB1001T Standard snoot - cor-ten, WB1002E Asymmetrical snoot - white, WB1002F Asymmetrical snoot - grey, WB1002H Asymmetrical snoot - anthracite, WB1002T Asymmetrical snoot - cor-ten, WB1003N Barn doors - black, WH0203 Honeycomb louvre 
tested and approved via E.O.L. (End Of Line) test with functioning test and check of electrical power consumption