Smoothy 1.6 recessed for outdoor applications
drive-over up to 1000 kg
recessed (ceiling, wall, floor)
Power consumption: 3,5W, 2,5W
Power supply: 24Vdc
Lumen output at source: 147 lm (3000K, 2.5W, CRI >90), 168 lm (3000K, 2.5W, CRI 80), 196 lm (3000K, 3.5W, CRI >90), 224 lm (3000K, 3.5W, CRI 80)
Delivered lumen output: 125 lm (3000K, 22°, 2.5W, CRI >90), 141 lm (3000K, 22°, 2.5W, CRI 80), 165 lm (3000K, 22°, 3,5W, CRI >90), 188 lm (3000K, 22°, 3.5W, CRI 80)
1 power LED, 1/4 ANSI BIN, 55 000h L90 B10 (Ta 25°C)
LED colour: 2700K, 3000K, 4000K
Optics: 13°, 30°: optical system consisting of a high-efficiency TIR lens combined with a high-quality technical filter, 13°, 22°, 30°, sharp 35°, 48°, 22°, 48°: optical system consisting of a high-efficiency TIR lens, sharp 35°: SHARP optical system consisting of a plano-convex lens for an extremely well-defined light beam, combined with a high-quality technical filter, diffuse: optical system consisting of 4-mm-thick, transparent, tempered extra-clear glass seal, resistant to knocks and scratches, and with high transmittance to eliminate chromatic aberrations, combined with a technical filter in MCPET and a 3-mm-thick disc in PMMA with a satin surface on both sides
CRI Colour Rendering Index: 80, >90
Body material: body made of ANTICORODAL 6082 aluminium alloy, made entirely on a CNC lathe and then electro-coloured black. Trim in brass, made with a CNC lathe, body made of ANTICORODAL 6082 aluminium alloy, made entirely on a CNC lathe and then electro-coloured black. Trim in AISI 316L stainless steel, made with a CNC lathe
Finishes: brass, stainless steel
RAL finish on request
Screen material: 4-mm-thick transparent extra-clear glass, high transmittance to ensure chromatic uniformity of light and tempered for excellent resistance to knocks and scratches
Seals: the silicone rubber gaskets guarantee maximum resistance to UV rays and unchanging mechanical characteristics over time
Thickness of installation surface: min 0 mm, max 25 mm
power supply unit not included
includes 1,5 m neoprene cable, H05RN-F 2x0,75/0,75 Ø6,3 mm
Ingress protection: IP65, IP67
Impact resistance: IK08
Protection systems: IPS (Intelligent Protection System) protects lighting fixtures from water infiltrations, which can occur if there are faulty junctions between the cables in outdoor or underwater applications. This innovation, patented by L&L, also guarantees electrical protection against polarity reversal, hot plugging, ESD and power surges, which can occur if there are faults in the electrical circuit
Operating temperature: -20°C — +45°C
Maximum device temperature: 50°C (Ta 25°C)
Glow wire test: 960°
Photobiological safety: photobiological safety: risk group 1 according to EN 62471:2006
Appliance class: class III
Weight: 250 g
Dimensions: Ø54x64 mm
Cutout dimensions: Ø48 mm
Volume of thermal heatsink: Ø180x110 mm
Energy efficiency class: F (light source) in accordance with EU 2019/2015
Accessories: WC4010 Outer casing, WE0700S Anti-glare screen, half transparent and half serigraphed black, WG0501 Retaining spring clip Ø48mm, WH0100 Honeycomb louvre, WL0100 Suction cup
tested and approved via E.O.L. (End Of Line) test with functioning test and check of electrical power consumption