Rio 2.2
linear profile for outdoor applications
drive-over up to 5000 kg
recessed (ceiling, wall, floor)
Power consumption: 19W; RGB: 17W
Power supply: 24Vdc
Lumen output at source: 2112 lm (2800K), RGB: 280 lm, R: 60 lm G: 180 lm B: 40 lm
Delivered lumen output: 580 lm (2800K), RGB: 200 lm, R: 44 lm G: 128 lm B: 28 lm
192 SMD low power LEDs, 3-step MacAdam;  RGB: SMD full-colour LED 50 000h L95 B10 (Ta 25°C)
LED colour: 2600K, 2800K, 3700K, RGB
Optics: diffuse: optical system consisting of light sources placed in a line on a rigid electronic circuit
CRI Colour Rendering Index: 80
Body material: body and screen made of co-extruded opal PMMA to provide high strength combined with high aesthetics. Caps in AISI 316L stainless steel and screws in A4 stainless steel
Seals: silicone rubber O-rings with anti-ageing treatment for an excellent mechanical seal
power supply unit not included
includes 1,5 m neoprene cable, H05RN-F 2x0,35/0,75 Ø6,3 mm;  RGB: includes 1,5 m FEP+PCP cable (equivalent to H05RN-F cable), 4x0,50/0,50 Ø6,3 mm
Ingress protection: IP65, IP67
Impact resistance: IK10
drive-over up to 5000 kg with aluminium casing, drive-over up to 500 kg with stainless steel casing. Non-standard lengths available on request
Protection systems: IPS (Intelligent Protection System) protects lighting fixtures from water infiltrations, which can occur if there are faulty junctions between the cables in outdoor or underwater applications. This innovation, patented by L&L, also guarantees electrical protection against polarity reversal, hot plugging, ESD and power surges, which can occur if there are faults in the electrical circuit
Operating temperature: -20°C — +45°C
Maximum device temperature: 40°C (Ta 25°C)
Photobiological safety: photobiological safety: risk group 1 according to EN 62471:2006
Appliance class: class III
Weight: 1480 g
Dimensions: 1010x38x51 mm
Energy efficiency class: F (light source) in accordance with EU 2019/2015
Accessories: WC8222 Aluminium outer casing - 1014 mm, WC8252 Stainless steel outer casing - 1013 mm, WC8422 Aluminium outer casing for plasterboard - 1014 mm, WN6002 U-shaped brackets pair, WN6005 Alignment kit for outer casing, WN6006 Pair of extractors for outer casings, WN8011 Alignment kit for stainless steel outer casings, WN8102 Anti-fall kit
tested and approved via E.O.L. (End Of Line) test with functioning test and check of electrical power consumption