Altopiano 3.6
recessed for outdoor applications
recessed (ceiling)
Power consumption: 15W
Power supply: 110-230Vac
Lumen output at source: 1341 lm (3000K)
Delivered lumen output: 1068 lm (3000K, 31°)
1 COB LED, 3-step MacAdam, 55 000h L90 B10 (Ta 25°C)
LED colour: Dim to Warm: 1800K — 3000K
Optics: 25°, 31°, 40°, 61°, 27°x72°: optical system consisting of a high-efficiency, deep-set TIR lens combined with a high-quality technical filter, diffuse: optical system consisting of a screen in frosted / transparent Plexiglas
CRI Colour Rendering Index: >90
Body material: body made of heat-dissipating, carbon-fibre-reinforced semicrystalline technopolymer with a thermal conductivity equal to that of stainless steel and high resistance to impact and sub-zero temperatures, and to corrosion even in harsh environments (saline). Trim in AISI 430 stainless steel, laser cut, machined and finished, then passivated to provide corrosion resistance of more than 1500 salt spray hours
Finishes: grey finish obtained through an  initial treatment with a ceramic nanoparticle coating, to prepare for painting, followed by a coat of epoxy paint and one of polyester paint to provide corrosion resistance of more than 1500 hours of salt spray. Paints compliant with the Qualicoat standard used in the automotive sector (RAL 9006), white finish obtained through an  initial treatment with a ceramic nanoparticle coating, to prepare for painting, followed by a coat of epoxy paint and one of polyester paint to provide corrosion resistance of more than 1500 hours of salt spray. Paints compliant with the Qualicoat standard used in the automotive sector (RAL 9003), anthracite finish obtained through an initial treatment with a ceramic nanoparticle coating, to prepare for painting, followed by a coat of epoxy paint and one of polyester paint to provide corrosion resistance of more than 1500 hours of salt spray. Paints compliant with the Qualicoat standard used in the automotive sector, cor-ten finish obtained through an  initial treatment with a ceramic nanoparticle coating, to prepare for painting, followed by a coat of epoxy paint and one of polyester paint to provide corrosion resistance of more than 1500 hours of salt spray. Paints compliant with the Qualicoat standard used in the automotive sector, finish obtained through an initial treatment with a ceramic nanoparticle coating, to prepare for painting, followed by a coat of primer, which enables the fixture to be painted with paints such as two-pack polyurethane varnishes and two-pack acrylic paints suitable for masonry surfaces
RAL finish on request
Screen material: 4-mm-thick transparent extra-clear glass, high transmittance to ensure chromatic uniformity of light, serigraphed grey (RAL 7015), and tempered for excellent impact and scratch resistance
Seals: the silicone rubber gaskets guarantee maximum resistance to UV rays and unchanging mechanical characteristics over time
Installation: The screw fastening system leaves plasterboard panels intact during installation. Fixture body just 90 mm high for installation in shallow spaces. Trim fixed magnetically to the cover, hiding the fixing screws and leaving a clean look
power supply unit included
includes 0.50 m neoprene cable, H07RN-F 2x1.0 Ø8.0 mm
Control system: DALI-2
Ingress protection: IP66
Impact resistance: IK08
Casambi-compatible version, controllable with the Casambi app, available on request
Operating temperature: -20°C — +45°C
Maximum device temperature: 45°C (Ta 25°C)
Glow wire test: 960°
Photobiological safety: in accordance with IEC TR 62778:2014
Appliance class: class II
Weight: 800 g
Dimensions: Ø140x90 mm
Cutout dimensions: Ø130 mm
Volume of thermal heatsink: Ø320x175 mm
Energy efficiency class: F (light source) in accordance with EU 2019/2015
Accessories: anti-glare shield, honeycomb louvre, WCA17 Outer casing for solid walls (ceiling), WFA06 Two-pin male-female connector, WGA03 Retaining spring clip, WNAP10A0 Anti-fall kit
tested and approved via E.O.L. (End Of Line) test with functioning test and check of electrical power consumption