Colorado 1.0
linear profile for outdoor applications
drive-over up to 2000 kg
recessed (floor)
Power consumption: 41W
Power supply: 230Vac
Lumen output at source: 4950 lm (3000K)
Delivered lumen output: 3643 lm (3000K, 12°)
18 high power LEDs pitch 33.3 mm, 2-step MacAdam, 60000h L80 B10 (Ta 25°C)  2200K: 3-step MacAdam, 60000h L80 B10 (Ta 25°C)
LED colour: 2200K, 2700K, 3000K, 4000K
Optics: 12° tiltable ±20°, 30° tiltable ±20°, 45° tiltable ±20°, 76° tiltable ±20°: optical system composed of a series of equidistant tiltable light sources, 20.83 mm apart. Fitted with locking screw. The deep-set PMMA TIR lens guarantees high-quality light emission and visual comfort, 15°x50° tiltable ±20°: optical system composed of a series of equidistant tiltable light sources, 20.83 mm apart. Fitted with locking screw. The deep-set elliptical PMMA TIR lens guarantees high-quality light emission and visual comfort, diffuse  tiltable ±20°: optical system composed of a series of adjustable light sources. Fitted with locking screw. The PMMA TIR lens guarantees high-quality light emission and visual comfort
CRI Colour Rendering Index: 80
Body material: body made of Anticorodal® low-copper-content aluminium EN AW 6060 T5 for excellent heat dissipation, manufactured from an extruded profile and subjected to a deep black electro-colouring process (between 10 and 15 microns) for excellent corrosion resistance. Caps made of black-painted (RAL 9005 matt) technopolymer for greater resistance to corrosion and atmospheric agents
Finishes: black anodized aluminium finish obtained by electro-colouring to give the product better heat dissipation and the material corrosion resistance
Screen material: 10-mm-thick acid-etched, tempered extra-clear glass, with grey-vitrified serigraphy (RAL 7015) resistant to knocks and scratches, and with high transmittance to eliminate chromatic aberrations. (diffuse version), 10-mm-thick transparent, tempered extra-clear glass, high-transmittance with grey-vitrified serigraphy (RAL 7015), to ensure chromatic uniformity and excellent resistance to knocks and scratches
Seals: Black peroxide EPDM O-rings guarantee lasting resistance to UV rays
Installation: On/off version: one IP68 4-way connector for power supply. Dimmable version: an IP68 4-way connector for power supply and an IP68 5-way connector for DALI and 0/1–10V signal
built-in power supply unit
Control system: ON/OFF, 0/1-10V, DALI-2
Ingress protection: IP65, IP67, IP69
Impact resistance: IK10
optical accessories of honeycomb louvre and anti-glare shield built into the lighting fixture and tiltable together with the optics.  In/out connection and easy wiring with quick connectors designed to connect the profiles one after the other
Casambi-compatible version, controllable with the Casambi app, available on request
Protection systems: The PID (Protective Impedance Device) protects lighting fixtures from electrical phenomena external to the system, such as static electricity accumulation or electromagnetic interference coming from the mains power. Generally, these are events with a low energy content
Operating temperature: -20°C — +45°C
Maximum device temperature: 40°C (Ta 25°C)
Glow wire test: 650°
Photobiological safety: in accordance with IEC TR 62778:2014
Appliance class: class II
Weight: 5600 g
Dimensions: 679x121x121 mm
Energy efficiency class: F (light source) in accordance with EU 2019/2015
Accessories: anti-glare shield, honeycomb louvre, WCCA10A0T Outer casing, WFA0005 5-m 4-pin interconnect cable, WFA01 4-pin male connector, WFA0101 1.5-m 4-pin interconnect cable, WFA0201 1.5-m 5-pin interconnect cable, WFA0205 5-m 5-pin interconnect cable, WFA05 5-pin male connector
tested and approved via E.O.L. (End Of Line) test with functioning test and check of electrical power consumption